- Home
- Moulds For Concrete Statues Statue Molds
Garden Sculptures Made Easier With moulds for concrete statues
If you are serious about using ornamental concrete to deck up the garden, you will soon need the molds. For making the garden statues have never been easier without these molds. You can use the various moulds for concrete statues available in the market to create any structure that you want.
Releasing from the concrete garden statue molds
Some of you may think that pouring the cement inside the mold is the toughest part of the job. But it is not so. Actually, releasing the final product from the mold will be more challenging. You need to ensure that the mold or product does not break or stick to each other.
- When using the aluminum or fiberglass molds, you have to prepare the large concrete statue molds to ensure that it will be easy to take them apart after you have poured the cement and it cures.
- If you choose to refrain from prepping or maintaining the molds before use, you will only shorten the lifespan of the molds, and these are not cheap at all.
- The good idea is to apply for the mold release prior to pouring with the help of a spray bottle or a brush.
- As a homemade solution, you can either use a mixture of castor oil with denatured alcohol or direct use of 91% rubbing alcohol while using the latex molds for concrete statues . Non-detergent motor oil is ideal for aluminum molds.
Using the right cement
The concrete statues definitely enhance the aesthetic of the garden. But are you confident that you can manage the process with the concrete statue molds for sale ? If not, then the following discussion will be enriching.
You need three chief things to make the concrete lawn ornaments:
- Sand
- Water
- Cement
The procedure of making the statues and painting them is fairly easy. But you should always select a good quality of cement for pouring in the concrete lion statue molds.
- You should not use the fine sand as something like the beach sand is not good at all to increase the durability of the product.
- Dampen the sand, but don’t keep water in the sand. It will help to minimize the pinholes in the finished sculpture.
The concrete statuary molds will help in creating the best sculptures only if you use clean water. A cement mixer can be useful, but it is better to use a mixing tub.
Helps in making big models
When you want to make something big like the model of a lion or a fountain, then you will have to use the molds as you cannot solidify the liquid cement without proper support. You need to add water to the mixture as long as it reaches a soupy consistency.
The beautiful molds for making concrete statues can easily hold the soupy mixture and allow it to settle down and cool. Once it solidifies, you should release it from the mold with utmost care.
Pouring in concrete lion statue molds
Pouring the concrete into the mold is a tricky task. You need to maintain a slow pace for pouring the cement on the sides of the concrete garden statue molds till the entire bottom is undercover. Then start dumping slowly into the middle of the mold.
Once full, you can tap around the bottom using a rubber mallet, but the taps should be gentle. It will help in releasing the trapped air in the concrete. The pouring process demands much patience. You can easily do the job all by yourself if you know how to maintain a steady hand.
Deck up the space with concrete animal statue molds
It is a good idea to decorate the garden using the molds to create the statues. Depending on the placement of the plants and the nature of the plants, you can now come up with interesting ideas for statues. The concrete animal statue molds available in the market will help you to make the masterpieces.
However, you can also choose to make a mold of your own. It will reduce the manufacturing cost further. It is a highly exciting experience as you are going to create a permanent artwork with the help of concrete and molds.
We serve across following Locations
